0408 Silicone LED Neon Light, Side light-emitting
Dimension: 4mm*8mm
Watt: 6W/m
Voltage: DC24V
CCT: 2100K-5300K
Bending: Horizontal Bending, Min bending diameter: 30mm
Cable Entry: Front Cable Entry/Side Cable Entry/Bottom Cable Entry
Description
0408 Silicone LED Neon Light, Side light-emitting
1). 0408 Flex LED Neon Light, DC24V, Cross section size 4mm*8mm(W*H), Horizontal Bending, Min bending diameter: 30mm. Silicone end cap Front Cable Entry, IP67.
2). Unique end cap design, quickly and easily installed to meet different lengths requirement, without welding wires and without waterproof processing.
3). UV resistant, chemical resistant and DIY connectors for indoor & outdoor solutions. Very easy to cut & reconnect on site.
4). 3 Step MacAdam bin and dot free lighting guarantee the most excellent performance over the rated lifetime.
Dimension:
Technical Data:
| Working Voltage | DC24V |
| CRI | >90 |
| Rated Power/m | 6w |
| Storage Temperature | -25℃~60℃ |
| Ambient Temperature | Tamin=-25℃, Tamax (Table below) |
| Output: | Low Output |
| Power(W/m): | 6W |
| Max. Ambient tempt.(Tamax): | 55℃ |
Note：
-When ambient temperature reaches 55℃ , the power is suggested to be 5W/M.
-Max. run length refers to single side feed in serial connection.
-The given data are typical values due to the tolerances of the production process and the electrical components, values for light output and electrical power can vary up to 10%.
-The given color temperature is the temperature of finished product.
Single Color (LM/meter):
Note: The running length is base on Constant Current 24Vdc LED Strip.
| Power/CCT | 2400K±100 | 3000K±100 | 3500K±200 | 4000K±300 | 5300K±300 | Max. Run Length | Unit Cut |
| 6W/m | 212 | 253 | 223 | 214 | 221 | 5m | 25mm |
Cable Entry (Silicone end cap Front Cable Entry):
Operation Guidance：
The LED neon Flex can be only bend along the light surface, like the following drawing; Do not twist the light, and do not bend smaller than the allowed minimum 30mm bending diameter.
Aluminium Profile:
FAQ
Q1: Can you provide free sample?
A: Most products are available. But the courier fee should be shouldered by your side.
Q2: What about the lead time?
A: Sample needs 3-5 working days, mass production time needs 10-25 working days according to order quantity.
Q3: Do you have any MOQ limit ?
A: No limit in first order , sample order or less quantity order is available.
Q4: How’s your warranty?
A: 3-5 years warranty based on different materials.
We will replace the products or accessories for our customers, if the damage is caused by our side not man-made.
Q5: Is it OK to print my logo on led light product?
A: Yes. It is available .
Q6: What’s ur payment terms?
A: Samples: Paypal, Bank TT, 100% payment in advance.
Bulk order: Bank TT, 30% deposit and balance 70% settled before shipment.
Q7: What’s ur After-Sale Service?
A: Quick reply on customers' questions; If anything goes wrong with the products'quality, we will replace for you free and undertake the shipping cost.
Q8: Can I visit your factory?
A: Sure, call us directly please.
Q9: How to deal with the faulty of products?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.3%. Secondly, We offer 0. 3-0.5% extra parts or products in ur order . Thirdly, during the guarantee period , we will send new one .
Q10: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT for sample order . It usually takes 3-5 days to arrive. And mass quantity order will be shipped by air or by sea.
A: Most products are available. But the courier fee should be shouldered by your side.
Q2: What about the lead time?
A: Sample needs 3-5 working days, mass production time needs 10-25 working days according to order quantity.
Q3: Do you have any MOQ limit ?
A: No limit in first order , sample order or less quantity order is available.
Q4: How’s your warranty?
A: 3-5 years warranty based on different materials.
We will replace the products or accessories for our customers, if the damage is caused by our side not man-made.
Q5: Is it OK to print my logo on led light product?
A: Yes. It is available .
Q6: What’s ur payment terms?
A: Samples: Paypal, Bank TT, 100% payment in advance.
Bulk order: Bank TT, 30% deposit and balance 70% settled before shipment.
Q7: What’s ur After-Sale Service?
A: Quick reply on customers' questions; If anything goes wrong with the products'quality, we will replace for you free and undertake the shipping cost.
Q8: Can I visit your factory?
A: Sure, call us directly please.
Q9: How to deal with the faulty of products?
A: Firstly, Our products are produced in strict quality control system and the defective rate will be less than 0.3%. Secondly, We offer 0. 3-0.5% extra parts or products in ur order . Thirdly, during the guarantee period , we will send new one .
Q10: How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT for sample order . It usually takes 3-5 days to arrive. And mass quantity order will be shipped by air or by sea.
